pH and Redox
HPT63 pH / Redox Transmitters
LTH Electronics HPT63
The HPT63 is a microprocessor based pH or Redox transmitter. Two different options of the HPT63 transmitter are available with the Base model offering a single industry standard 4-20mA output. The Advanced HPT63 will offer two 4-20mA outputs enabling the process temperature to be measured and transmitted as well as either the pH or Redox value. The Advanced HPT63 model will have 2 relay outputs for process control and also 3 digital inputs for on-line/off line and clean function selection via a plc.
learn MOREpH and Redox Indicator Controllers
LTH Electronics BP9 – BR9
Aimed primarily at simple pH and Redox control applications the instruments retain only the most important functions. This has two benefits; it reduces the purchase price and simplifies the installation and operation of the instrument, without compromising quality or reliability.
learn MORESeries pH & Redox Sensors for the process industries
LTH Electronics S400
The S400 sensors have been designed for rugged service in submersion or inline process applications. The reference cell features a double junction design for extended service life in harsh applications. The high quality sensors are constructed of corrosion resistant wetted materials including Ryton®, Teflon®and glass. They can be supplied with built in temperature compensation and a solution ground connection.
learn MOREpH and Redox Insertion Sensors
LTH Electronics 9000 Series
The 9000 series pH & Redox sensors are designed for direct installation into a pipe or in the wall of a tank for continuous pH or Redox monitoring and control. These sensors have a large non-clogging peripheral reference junction, which is constructed in annular form around the sensing electrode. The 9000 series sensors have a Kynar body with a 0.5” NPT male threaded process connection and must always be installed at least 15 ° above horizontal for correct operation.
learn MOREpH and Redox Electrodes
LTH Electronics PG135
The P11, P14, O11, O14 AND GT135 electrodes are 12mm diameter electrodes with the European standard PG13.5 configuration. The 12mm x 120mm size fits a wide array of housings found in both industrial and waste water treatment applications. This standard design simplifies electrode stocking, as one sensor can now serve as a replacement for numerous installations.
learn MOREHigh Pressure and High Temperature pH and Redox (ORP) Sensors
LTH Electronics Dynaprobe
DynaProbes were designed to withstand the aggressive environment of pulp and paper manufacturing. The patented internal design features a solid state, reference half-cell with the unique IonTrap™ for extended sensor life in the most severe applications. Choose from the different body styles, body materials, reference materials and bulb designs to create a sensor to fit any industrial application. The three primary sensor designs are: Twist Lock, Pipe Thread, and Valve Retraction.
learn MOREHolders for PG13.5 pH and Redox Electrodes
LTH Electronics PME20 WPA1
The PME20 series of PVC holders provide a very convenient way of mounting the sensor into an open tank, channel or pipework system. The holders are suitable for use with any PG13.5 style pH or Redox electrodes.
learn MOREAutomatic pH and Redox Electrode Cleaning
LTH Electronics Spray Wash Cleaning
pH measurement of many industrial processes and waste streams can be difficult to measure reliably over extended time periods without some form of maintenance. LTH Electronics can offer spray wash cleaning adapters for their pH electrode systems to reduce maintenance and improve electrode life in applications where a pH or Redox electrode bulb is prone to coating.
learn MOREPortable instruments for measuring Conductivity, pH, Redox and Temperature
LTH Electronics HD23050
The HD2306.0 portable conductivity meter is supplied complete with a combined 4-electrode conductivity and temperate sensor covering a measuring range of 0µS/cm to 200mS/cm with a cell constant K=1.0 and also has automatic range change. The HD2306.0 conductivity meter has automatic temperature compensation using a PT100 temperature compensator which is built into the conductivity cell. The temperature compensation can be set to a base of 20°C or 25°C and can also be set to out. There is a choice of automatic or manual calibration and the option of Auto power off. The HD2306.0 is powered by 3 x 1.5v type AA batteries. The kit is supplied in a protective carrying case with a 12,880 µS/cm standard solution.
learn MOREAnalytical instrumentation for measurement applications
LTH BXD17 Series
LTH BXD17 Series a microprocessor controlled instrument range offering individual controllers for the contacting conductivity, electrodeless (inductive) conductivity, pH / redox (ORP) and dissolved oxygen measurement parameters.
learn MORE