Contacting Conductivity

LTH HD2306.0 Portable Conductivity Measurement Kit is supplied complete with a combined 4-electrode conductivity and temperate sensor covering a measuring range of 0μS/cm to 200mS/cm with a cell constant K=1.0 and also has automatic range change.

LTH MXD70 Multi-parameter Transmitter brings a new dimension to analytical process measurements with a modular design to meet ever changing process requirements, to measure and control any combination of inputs from pH, redox, dissolved oxygen or conductivity sensors.

LTH CDM9 Series Conductivity Indicator Controller is available as a panel or surface mounting in an IP66 enclosure with a 3.5 digit liquid crystal display. The CDM9 provides a single pole change over relay to operate a solenoid valve, dosing pump or visual or audible alarm.

LTH CMC7/CMC8 Series Insertion Conductivity Cells are suitable for use in pure water measurement applications where cost and size are important factors. The principle advantage of this type of construction is that the cell constant is not affected by sample volume or the proximity of any pipework. The conductivity cells can be supplied with traceable certification.

LTH CMC14/10 Insertion Conductivity Cell has been designed specifically for use in boiler blowdown applications to monitor the total dissolved solids directly without the need for a sample cooler.

Conductivity is an extremely sensitive measurement of the levels of dissolved materials in water. LTH CMC15, CMC24, and CMC25 Pure Water Conductivity Cells in conjunction with an analyser are able to detect levels as low as 1ppb concentration.

LTH CMC30 Conductivity Cells incorporate a quick release IP66 connector that simplifies installation, maintenance and fault finding.

LTH BXD17 Series a microprocessor controlled instrument range offering individual controllers for the contacting conductivity, electrodeless (inductive) conductivity, pH / redox (ORP) and dissolved oxygen measurement parameters.

LTH HCT63 Contacting Conductivity Transmitters are microprocessor controlled conductivity measurement instruments with the facility to display in ìS/cm, mS/cm, MÙ.cm or ppm. The unit utilises a multifunction LCD to display readings and provide feedback to the operator.

AquaCal 2000 Portable pure water measurement hand held system has been developed to provide a method of measuring the conductivity or resistivity of pure water to traceable standards making it suitable to validate pure water treatment plants.