LIQUID ANALYSIS

LTH Flowmeter Ultrasonic Flow Transmitter is temperature-compensated and suitable for connection with MODBUS RTU acquisition systems.

LTH PMAG Electromagnetic Flowmeter is a complete magnetic flowmeter system consists of two components, the PMAG microprocessor-based integral mount magnetic flowmeter transmitter and a flowtube. The flowtube is installed in-line with process piping, either vertically or horizontally.

Conductivity is an extremely sensitive measurement of the levels of dissolved materials in water. LTH CMC15, CMC24, and CMC25 Pure Water Conductivity Cells in conjunction with an analyser are able to detect levels as low as 1ppb concentration.

LTH CMC30 Conductivity Cells incorporate a quick release IP66 connector that simplifies installation, maintenance and fault finding.

Conductivity & pH Buffer Solutions from LTH Electronics range of calibration solutions and standards for conductivity, pH and Redox measurement for the calibration and checking of portable and on-line instrumentation and sensors are formulated to provide precise values.

LTH BXD17 Series a microprocessor controlled instrument range offering individual controllers for the contacting conductivity, electrodeless (inductive) conductivity, pH / redox (ORP) and dissolved oxygen measurement parameters.

LTH HCT63 Contacting Conductivity Transmitters are microprocessor controlled conductivity measurement instruments with the facility to display in ìS/cm, mS/cm, MÙ.cm or ppm. The unit utilises a multifunction LCD to display readings and provide feedback to the operator.

AquaCal 2000 Portable pure water measurement hand held system has been developed to provide a method of measuring the conductivity or resistivity of pure water to traceable standards making it suitable to validate pure water treatment plants.

LTH CDM9 Series Conductivity Indicator Controller is available as a panel or surface mounting in an IP66 enclosure with a 3.5 digit liquid crystal display. The CDM9 provides a single pole change over relay to operate a solenoid valve, dosing pump or visual or audible alarm.

LTH CMC7/CMC8 Series Insertion Conductivity Cells are suitable for use in pure water measurement applications where cost and size are important factors. The principle advantage of this type of construction is that the cell constant is not affected by sample volume or the proximity of any pipework. The conductivity cells can be supplied with traceable certification.